Usage and validation of a fluid structure interaction methodology for the study of different suction valve parameters of a hermetic reciprocating compressor

Authors

  • W Lang
  • R Almbauer
  • D Jajcevic

DOI:

https://doi.org/10.1260/1750-9548.4.1.65

Abstract

The dynamics of the flatter valves inside a hermetic reciprocating compressor used in household appliances is the most important factor concerning the gas dynamic behaviour of such a compressor. Hence for a good valve design and for a reliable simulation of the compressor the ability to predict the movement of the valves is indispensable. The present paper describes a methodology which allows the prediction of the valve dynamics. For the validation of the methodology the simulation results of the suction valve dynamics have been compared with experimental data obtained out of measurements with a Laser-Doppler-Vibrometer. Furthermore the method has been used for the variation of some suction valve parameters and their influence onto the overall compressor performance has been shown. The whole methodology has been implemented into a commercial available CFD code (FLUENT) as a user defined function (UDF).

References

EU Commission Directive 2003/66 EG

Costagiola, M., 1950.: The theory of spring-loaded valves for reciprocating compressors, Journal of Applied Mechanics, vol. 17, p. 415 - 420. Forbes Pearson S. 1996, Uses of Hydrocarbon Refrigerants, Proc. Aarhus Conference, IIF/IIR: 439-446

Nieter, J. J. and Singh, R., 1984.: A computer simulation study of compressor tuning phenomena, Journal of Sound and Vibration 97 (1984), pp. 475-488. https://doi.org/10.1016/0022-460x(84)90273-6

Hayashi, S., Hayase, T. and Kurahashi, T., 1997.: Chaos in a hydraulic control valve, Journal of Fluids and Structures 11 (1997), pp.693-716. https://doi.org/10.1006/jfls.1997.0096

Böswirth, L., 2000.: Strömungen und Ventilplattenbewegung in Kolbenverdichterventilen, Eigenverlag, Vienna (2000)

Matos, F. F. S, Prata, A. T. and Deschamps, C. J. 1999.: Numerical analysis of the dynamic behavior of plate valves in reciprocating compressors. In: International Conference on Compressors and Their Systems. London, 13-15 September 1999, pp. 453-462.

Junghyoun Kim, Semyung Wang, Sungwoo Park, Kioh Ryu and Jongpill La, 2006.: Valve dynamic analysis of a hermetic reiprocating compressor, Proceedings of the International Compressor Conference Purdue, Purdue University, IN, USA

Baudille, R., Biancolini, M. E., 2006.: Modelling FSI prolbems in Fluent: a dedicated approach by means of UDF programming, Proceedings of the European Automotive CFD Conference, FISITA Congress 2006, F2006M235

ASHRAE. (2005) ‘Method of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Unit’, ANSI/ASHRAE Standard-23.

Lang, W., Almbauer, R. A., Burgstaller, A., Nagy, D.: Coupling of 0-, 1- and 3-d Tool fort he Simulation of the Suction Line of a Hermetic Reciprocating Compressor, Proceedings of the International Compressor Conference at Purdue, 2008, West Lafayette, USA, Paper 1272

Corberan, J. M., Gascon, M. L. (1994) ‘TVD Schemes for the Calculation of Flow in Pipes of Variable Cross-Section’. Mathematical Computational Modelling, Vol.21. No.3 pp.85-92. https://doi.org/10.1016/0895-7177(94)00216-b

Zienkiewicz, O. C., and Taylor, R. L., 2000.: The Finite Element Method, Third, fourth and fifth editions, McGraw-Hill, London, 1977 and 1989/91, Butterworh and Heinemann, Oxford, UK, Boston, US.

Newmark, N. M., 1959.: A Method for Computation of Structural Dynamics, Proceedings of the ASCE, 85 EM3, pp. 67-94.

Sieber, G., 2001.; Numerical Simulation of Fluid-Structure Interaction using loose coupling methods, Dissertation, Technische Universität Darmstadt, Germany

Glück, M., 2002.: Ein Beitrag zur numerischen Simulation von Fluid-Struktur-Interaktionen - Grundlagenuntersuchungen und Anwendung auf Membrantragwerke, Dissertation, Technische Fakultät der Universität Erlangen-Nürnberg, Germany

Nagy, D., Almbauer, R. A., Lang, W., Burgstaller, A.: Valve lift measurement for the validation of a compressor simulation model, Proceedings of the International Compressor Conference at Purdue, 2008, West Lafayette, USA, Paper 1274

Published

2010-03-31

How to Cite

Lang, W., Almbauer, R., & Jajcevic, D. (2010). Usage and validation of a fluid structure interaction methodology for the study of different suction valve parameters of a hermetic reciprocating compressor. The International Journal of Multiphysics, 4(1), 65-82. https://doi.org/10.1260/1750-9548.4.1.65

Issue

Section

Articles