Research on Manufacturing Technology of Complex Modeling Chinaware Integrated with 3D Printing Technology
DOI:
https://doi.org/10.21152/1750-9548.16.4.395Abstract
Study the manufacturing process of making complex chinaware by combining 3D printing technology with traditional technology. In this process, the ceramic artwork is divided into several component, The manufacturing process of each part of the green body is selected according to the shape, and then all the green bodies fit together by the assembly structure and interpenetrating network binder, then biscuit firing (debinding), glazing and glaze firing. Adjust the composition ratio of ceramic slurry to make its sintering shrinkage the same as that of traditional ceramic slurry. The technological process and parameters are given through experiments. The structure were analyzed by field emission scanning electron microscope. The influence factors of glue discharge process, microstructure and pore distribution of printing body after glue discharge were studied. This provides a basis for the popularization and application of the process.
References
Meyers, S., De Leersnijder, L., Vleugels, J., & Kruth, J. P., Direct laser sintering of reaction bonded silicon carbide with low residual silicon content. Journal of the European Ceramic Society, 2018, 38(11): p. 33709-3717. https://doi.org/10.1016/j.jeurceramsoc.2018.04.055
Owen, D., Hickey, J., Cusson, A., Ayeni, O. I., Rhoades, J., Deng, Y., Zhang, Y., Wu, L.M., Park, H.Y., Hawaldar, N., Raikar, P.P., Jung, Y.G., Zhang, J., 3d printing of ceramic components using a customized 3d ceramic printer. Progress in Additive Manufacturing, 2018, 3(1-2): p. 3-9. https://doi.org/10.1007/s40964-018-0037-3
Xu Y., Zhou Y.L., Exploration and practice on ceramic jewelry design supported by ceramic 3D printing technology. China Ceramics, 2021, 57(2): p. 77-81. https://doi.org/10.16521/j.cnki.issn.1001-9642.2021.02.011
Zeng Y., Zhang Z.J., Sun L.J., Yao H.H., Chen J.M., Atmosphere debinding heat treatment of 3D printed alumina ceramics. Journal of Inorganic Materials, 2022, 37(3): p. 33-337. https://doi.org/10.15541/jim20210634
Prem N., Sindersberger D., & Monkman G.J., Mini-Extruder for 3D Magnetoactive Polymer Printing. Advances in Materials Science and Engineering, 2019, 2019: p. 8715718. https://doi.org/10.1155/2019/8715718
Srinivasan, D., Meignanamoorthy, M., Ravichandran, M., Mohanavel, V., Alagarsamy, S. V., Chanakyan, C., Rajkumar, S. 3D Printing Manufacturing Techniques, Materials, and Applications: An Overview. Advances in Materials Science and Engineering, 2021, 2021: p. 5756563. https://doi.org/10.1155/2021/5756563
Coppola, B., Tardivat, C., Richaud, S., Tulliani, J. M., Montanaro, L., & Palmero, P., 3d printing of dense and porous alkali-activated refractory wastes via direct ink writing (DIW). Journal of the European Ceramic Society, 2021, 41(6): p. 3798-3808. https://doi.org/10.1016/j.jeurceramsoc.2021.01.019
Tan, J. J. Y., Lee, C. P., & Hashimoto, M., Preheating of gelatin improves its printability with transglutaminase in direct ink writing 3d printing. International Journal of Bioprinting, 2020, 6(4): p. 118-124. https://doi.org/10.18063/ijb.v6i4.296
Jia Y.H., A Research Review on Innovative Design for Additive Manufacturing-Based Ceramics. Industrial& Engineering Design, 2021, 3(3): p. 13-19. https://doi.org/10.19798/j.cnki.2096-6946.2021.03.003
Chen, Y., Furukawa, T., Ibi, T., Noda, Y., & Maruo, S., Multi-scale micro-stereolithography using optical fibers with a photocurable ceramic slurry. Optical Materials Express, 2021, 11(1): p. 105-114. https://doi.org/10.1364/OME.404217
Emir, F., & Ayyildiz, S., Accuracy evaluation of complete-arch models manufactured by three different 3d printing technologies: a three-dimensional analysis. Journal of Prosthodontic Research, 2021, 65(3): p. 365-370. https://doi.org/10.2186/jpr.JPOR_2019_579
Park, H. K., Shin, M., Kim, B., Park, J. W., & Lee, H., A visible light-curable yet visible wavelength-transparent resin for stereolithography 3d printing.NPG Asia Materials, 2018, 10(4): p. 82-89. https://doi.org/10.1038/s41427-018-0021-x
Hasegawa, H., Inkjet printing and nanoscale electrocrystallization: complete fabrication of organic microcrystals-based devices under ambient conditions. Applied Materials Today, 2017, 9: p. 487-492. https://doi.org/10.1016/j.apmt.2017.09.011
Medellin-castillo, H. I., & Zaragoza-Siqueiros, J., Design and manufacturing strategies for fused deposition modelling in additive manufacturing: a review. Chinese Journal of Mechanical Engineering, 2019, 32(3): p. 13-28. https://doi.org/10.1186/s10033-019-0368-0
Ndinisa, S. S., Whitefield, D. J., & Sigalas, I., Fabrication of complex shaped alumina parts by gelcasting on 3D printed moulds. Ceramics International, 2020, 46(3): p. 3177-3182. https://doi.org/10.1016/j.ceramint.2019.10.021
Han Z.Q., Li L., Liu S.H., Qiu K., Wang S.X., & Liu F.T., Research on Rheological Properties of StereolithographyZrO, Ceramic Slurry. Bulletin of the Chinese Ceramic Society, 2021, 40(6): p. 1965-1971. https://doi.org/10.16552/j.cnki.issn1001-1625.20210527.002
Fuji, M., Inoue, Y., Takai, C., Nakashima, Y., & Ishihara, M., Simple analysis of adsorption amount of dispersant on ceramic slurry by capillary electrophoresis. Journal of the Society of Powder Technology Japan, 2017, 54(11): p. 725-731. https://doi.org/10.4164/sptj.54.725
Jongprateep, O., Wattana, N., Sato, N., Kien, P. T., & Inseemeesak, B., Effects of solid loading and silica addition on microstructure and compressive strength of hydroxyapatite specimens fabricated by freeze casting technique. Ceramics International, 2018, 44(1): p. S156-S160. https://doi.org/10.1016/j.ceramint.2018.08.125
Dehurtevent, M., Robberecht, L., Hornez, J. C., Thuault, A., Deveaux, E., & Béhin, P., Stereolithography: a new method for processing dental ceramics by additive computer-aided manufacturing. Dental Materials, 2017, 33(5): p. 477-485. https://doi.org/10.1016/j.dental.2017.01.018
Sun, L., Yuan, D., Liu, R., Wan, S., & Lu, X. Coadsorption of gaseous xylene, ethyl acetate and water onto porous biomass carbon foam pellets derived from liquefied Vallisnerianatans waste. Journal of Chemical Technology and Biotechnology, 2020, 95(5): p. 1348-1360. https://doi.org/10.1002/jctb.6319
Boazak, E. M., Greene Jr, V. K., & Auguste, D. T., The effect of heterobifunctional crosslinkers on HEMA hydrogel modulus and toughness. PloS ONE, 2019, 14(5): p. 5890-5895. https://doi.org/10.1371/journal.pone.0215895
Abd Aziz, M. H., Othman, M. H. D., Hashim, N. A., Adam, M. R., & Mustafa, A., Fabrication and characterization of mullite ceramic hollow fiber membrane from natural occurring ball clay. Applied Clay Science, 2019, 177: p. 51-62. https://doi.org/10.1016/j.clay.2019.05.003
Wu, Z., Liu, W., Wu, H., Huang, R., He, R., Jiang, Q., Wu, S., Research into the mechanical properties, sintering mechanism and microstructure evolution of Al2O3-ZrO2 composites fabricated by a stereolithography-based 3D printing method. Materials Chemistry and Physics, 2018, 207: p. 1-10. https://doi.org/10.1016/j.matchemphys.2017.12.021
Yıldız, B. K., Yılmaz, H., & Tür, Y. K., Influence of nickel addition on the microstructure and mechanical properties of Al2O3-5vol%ZrO2 ceramic composites prepared via precipitation method. International Journal of Minerals Metallurgy and Materials. 2019, 26(07): p. 908-914. https://doi.org/10.1007/s12613-019-1792-y
Lombardo, S. J., & Retzloff, D. G., A process control algorithm for reaction‐diffusion minimum time heating cycles for binder removal from green bodies. Journal of the American Ceramic Society, 2019, 102(3): p. 1030-1040. https://doi.org/10.1111/jace.15964
Published
How to Cite
Issue
Section
Copyright (c) 2022 H Zheng, H Ao, L Wang
This work is licensed under a Creative Commons Attribution 4.0 International License.